Cosytoes Wireless Timerstat User Guide
For correct operation the transmitter unit should be sited in the room with the underfloor heating so that it is able to measure the room temperature. The transmitter can be freestanding or wall hung using the mounting provided.
(If the transmitter is located in a cupboard, for example, where the temperature is cooler than the room but warmer than the minimum set temperature for off periods - the heating will switch o/off when required but the floor will be controlled by the floor limitation setting on the receiver.)
Product Description: Transmitter Unit.
Product Description: Receiver Unit.
Fixing the Plug-in stand on Transmitter unit.
Insert “-" head screw-driver into position shown here.
Push upward
Pull stand off back plastic housing
Hold the stand with hand, press it vertically against the “groove” originally is to store the stand.
Note: Make sure the “stand” faces to correct direction.
Glide the "stand" downward.
The stand is now fixed
Pressing “stand” downward, as shown in picture above, can take it off from back housing.
Installing/replacing batteries in the Transmitter-unit.
Introduction.
The programmable transmitter is simple to use, once you understand the basics.
There is a temperature sensor within the unit that will switch the underfloor heating on when the set temperature exceeds the room temperature.
There are 6 default time periods with set temperatures already programmed in
Start time for P1 is 06:00 @ 23oC
Start time for P2 is 08:30 @ 17oC
Start time for P3 is 12:00 @ 17oC
Start time for P4 is 14:00 @ 17oC
Start time for P5 is 16:30 @ 23oC
Start time for P6 is 22:30 @ 17oC
If you want a time period off then have the set temperature low - say 10oC and if you want the period on - have the temperature higher to suite. A normal room ambient temperature is 22oC.
It is also possible to adjust the start times of the relevant time periods - but please note, do not try to eliminate time periods or the unit will 'lock up.'
Before commencing, the reset button should be pressed or the unit may not function correctly.
To set date and time.
Hold down ‘Set’ for 10 seconds - select degrees C or degrees F using <> buttons then press OK
Select 24hour clock or 12hour clock using <> buttons then press OK
Set the year using <> buttons then press OK
Set the month using <> buttons then press OK
Set the day/date using <> buttons then press OK
Set the hour using <> buttons then press OK
Set the minutes using <> buttons then press OK
Set the temperature differential to 0.5 using <> buttons then press OK
Ignore the filter hours that is not applicible to heating and press OK
PRESS OK TO RUN.
To program the timerstat.
Press ‘Set’ once - (you will start programming from Monday morning)
Set the temperature for early moring using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK
Set the temperature for day using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK
Set the temperature for midday using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK
Set the temperature for afternoon using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK
Set the temperature for evening using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK
Set the temperature for night using the <> buttons then press OK
Set the time you want this temperature to begin using the <> buttons then press OK.
(you will now start to set Tuesday in the same way)
If you want Tuesday to be the set the same as Monday:
Press [‘Set’] again to copy the program. [‘From’] will flash on the screen, press the ^ button to select Mo (Monday) then press OK
[‘To’] will flash on the screen, press the ^ button to select Tu (Tuesday) then press OK
[‘To’] will flash on the screen again, if you want to copy the program to Wednesday press the ^ button to select We then press OK
[‘To’] will flash on the screen again, if you want to copy the program to thursday press the ^ button to select Th then press OK etc...
All the days you have selected to copy the program to will be displayed on the screen
When you have selected all the days that you want to copy, press OK.
THEN PRESS OK TO RUN.
NOTE: There are 6 time periods each day so that if you want the heating on then during a time period then increase the temperature for that time period - and if you want it off then set a low temperature. So for example, if you want the heating on in the morning then set periods 1 and 5 high and the other time periods low. The set temperature on the programmer gives the receiver unit the command for the floor temperature and is subject to the floor temperature limitation set by the installer in the receiver unit. The temperature display under the time is the air temperature around the programmer and not the floor temperature - the heating on/off blue LED shows when the system has reached temperature
Overriding the automatic program settings:.
Simply press < or > to change temperature, then press OK. Will revert to normal settings at end of current time period.
Press M once for ‘comfort override’, select temperature with < or >, then press OK, then select time with < or >, then press OK.
Press M twice for ‘permanent hold temperature’, select temperature with < or >, then press OK.
Press M three times for ‘hold temp until’, select temperature with < or > , then press OK,
Select date/year with < or > then press OK.
Note: to remove overrides, press OK in all cases.
Need Help?
Should you need assistance with the programming then please telephone 0113 2577 588 or email info@cosytoes.biz.
Want to Buy?
Please contact us or use our dealer page to find your nearest dealer. The Cosytoes Price List is available here.
